Product Details:
|
Power: | 2.5KW 220V | Applicable Industries: | Manufacturing Plant, Printing Shops, Other, Hospital |
---|---|---|---|
Printing Speed: | 220 Crowns / 4.5 Hours | Key Selling Points: | High-accuracy |
High Light: | Metal DLMS 3D Printer,Laser DLMS 3D Printer,Titanium sintering 3d printer |
TI-150 Dental Laser Metal Sinter Printer 3d Titanium 3d Metal Printer Selective Laser Melting
project | Key innovation points | |
1 | Research on the improvement of metal crown 3D printer based on multi-pass contour outline processing technology | In order to ensure the surface accuracy of the molding parts, eliminate the influence of convex effect on the surface roughness, the composite scanning strategy of internal orthogonal filling and multiple profile is proposed.According to the laser melt path size of the existing optimization process, the lap rate between multiple profiles is determined to adopt different scanning spacing, and multiple profiles are used from inside to outside, from weak to strong, which can effectively reduce the surface roughness of the forming parts. |
2 | Improvement Study of High-precision Smooth 3D Printer Based on "Zero Emission" Laser Process | Response to green industry, to effectively absorb the metal printing process splash and dust waste, improve 3D printer sealing, invented a new circulation filtration system, in the molding cavity clean at the same time, without any toxic and harmful substances emissions, all the printing process of dust are collected in the filter, thus realizing the "zero emissions". |
3 | Forming process applied to metal brackets | The key to optimizing the printing of metal brackets is to improve the printing efficiency while retaining the pattern features of the brackets and wearing the close fit without deformation. This process adopts 40 micron layer thick printing, and optimizes the filling path according to the mechanical properties, which can greatly improve the printing efficiency, and greatly improve the toughness and density of the metal bracket, fully consistent with the mechanical properties of the bracket. The combination of tree support, conical support and linear support can provide enough strength support and retain the morphological characteristics of the bracket, greatly reduce the subsequent grinding workload, and expand the application scope of 3D printing bracket. |
4 | A metal 3D printer powder recovery cylinder structure | In order to improve the quality of powder recycling, a new printing powder recycling cylinder was invented, making the recycling cylinder closer to the powder drop mouth, avoiding the original cylinder block, affecting the printing.At the same time, because the recycling cylinder is closer to the powder drop mouth, it also reduces the waste of powder and improves the utilization rate of powder.Compared to the original cylinder, the new cylinder is easier to remove and install, simplifying the operation difficulty. |
5 | Nitrogen circulation mechanism dedicated for metal printing | How to effectively absorb the splash and dust waste of metal printing process to provide high purity protection atmosphere is a necessary requirement to ensure the quality of printing molding parts.Compared with the original circulation system, the new nitrogen circulation structure is dedicated to metal printing system, with a larger filter area, better sealing, equipped with wind speed and flow monitoring, which can automatically adjust the circulating wind speed and effectively remove the printing dust.At the same time, the filter element is extended from once a week to once a year, from once a day to once a week, which greatly improves the ease of use of the system and reduces the maintenance cost. |
6 | Metal printing powder laying mechanism adjustment flat plate | Whether the substrate adjustment is flat and directly affect powder laying quality, how to quickly and accurately adjust the substrate is one of the keys to improve the printing efficiency.The new powder mechanism adjustment plate, by porous steel plate, fixation screw and adjustment wire rent, compared with the previous metal adjustment plate, the operation steps are simpler, faster leveling speed, leveling can match laser leveling or micrometer to detect the flatness, the effect is better, more practical. |
7 | Equipment unique scraper seal structure | In the process of metal printing, due to the powder spreading movement and the circulating flow rate, it is difficult to avoid the slight dusting phenomenon of the metal powder. In order to protect the smooth operation of the powder spreading mechanism, a sealing structure is invented, which seals the motion control and transmission part of the scraper without affecting the movement of the powder spreading arm, so as to avoid the influence of the metal powder in the molding cavity on the motor and the screw, damaging the motor and lead screw. |
8 | Laser light path dynamic focusing mechanism | In order to improve the forming accuracy and printing efficiency of large-scale printing, a laser optical path dynamic focusing mechanism is adopted. The laser optical path dynamic focusing mechanism of the metal laser 3D printer can complete the real-time focusing before the laser enters the galvanometer, and always ensure the focal position of the large-scale working surface. Reduce the precision deviation during printing, freely adjust the position of the focusing mirror, and adjust the size of the focusing spot during the printing process. |
Contact Person: Susan
Tel: +8613925933549