|
Product Details:
|
| Appearance: | Colored Transparent Liquid | Ash ContentTransparent: | Gray/Yellow |
|---|---|---|---|
| Odor Weak:: | Odor | Bending Strength: | 39-42MPa (Test Standards: ASTM D790) |
| Bending Modulus: | 900-1000MPa (Test Standards: ASTM D790) | Hardness: | 80 Shore D (Test Standards: ASTM D2240) |
| Notch Impact Strength: | 36.4J/m (Test Standards: ASTM D256) | Wavelength: | 405nm |
| High Light: | 80 Shore D Dental Photosensitive Resin,Colored Transparent Liquid Dental Photosensitive Resin |
||
Model V1.0/V3.0 is used for the production of dental models. The printed surface of the dental model not only has high hardness, but also accurately restores details. The ultra-low material shrinkage rate ensures that the model will not deform after long-term storage. It is designed for printing transparent surgical guide models that can be sterilized under high pressure. Precision, chemical resistance, and durability. Slight odor and lack of hazardous monomers, this material can be used even in small laboratories, providing greater pressure and impact resistance, wear resistance, and corrosion resistance, thus achieving excellent edge adaptability and dimensional stability. It also has a wider range of color tone choices to achieve natural tooth aesthetics and maintain high color stability even in corrosive situations.
Dental Resin For Metal 3d Printer (washing) With High Precision Fast Printing Speed High Abrasion Resistance astm d790
SAFE:Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
LOW SHRINKAGE
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
ACCURATE
Provides high precision printing and fitting after casting
BIOCOMPATIBLE
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
LIQUID:The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time
DURABLE:Very high hardness and tensile strength
SERTIFICATION:Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN
Appearance: Colored transparent liquid
Ash contentTransparent: Blue
Bending Strength:39-42MPa (Test Standards: ASTM D790)
Bending Modulus:900-1000MPa (Test Standards: ASTM D790)
Hardness:80 Shore D (Test Standards: ASTM D2240)
Notch Impact Strength:36.4J/m (Test Standards: ASTM D256)
Wavelength: 405nm
Contact Person: Michu
Tel: +8618022866420
