|
Product Details:
|
| Material: | Resin | Color: | A1.A2.A3 |
|---|---|---|---|
| Funcion: | 3D Printing | Feature: | BIOCOMPATIBLE |
| High Light: | Temporary Teeth Model Resin,High Hardness Teeth Model Resin |
||
The printed model is safe,tasteless and has ultra-high tensile,bending and wear resistance,and its mechanical properties and water absorption meet the requirements of use.
The surface of the model is simply polished to give a natural appearance of tooth texture and color
A biocompatible photocured resin material for the manufacture of temporary crowns and Bridges
SAFE:Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
LOW SHRINKAGE
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
ACCURATE
Provides high precision printing and fitting after casting
BIOCOMPATIBLE
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
LIQUID:The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time
DURABLE:Very high hardness and tensile strength
SERTIFICATION:Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN
SPECIFICATION
Hardness: 86 Shore D (Test Standards: ASTM D2240)
Bending Strength:85MPa (Test Standards: ASTM D790)
Bending Modulus:1753MPa (Test Standards: ASTM D790)
Notch Impact Strength:50J/m (Test Standards: ASTM D648)
Wavelength: 405nm
| Odor Weak:: | Odor | Bending Strength: | 85MPa (Test Standards: ASTM D790) |
|---|---|---|---|
| Bending Modulus: | 1753MPa (Test Standards: ASTM D790) | Hardness: | Hardness:86 Shore D (Test Standards: ASTM D2240) |
| Notch Impact Strength: | 50J/m (Test Standards: ASTM D648) | Wavelength: | 405nm |
.
Contact Person: Ms. Susan Shi
Tel: 13925933549
Fax: 86-20-8150-9362
