|
Product Details:
|
| Material: | Resin | Color: | Blue |
|---|---|---|---|
| Funcion: | 3D Printing | Feature: | Water Washable |
| High Light: | High Hardness Dental Model Washable Resin,3D Printing Dental Model Washable Resin |
||
Dental Model Water Washabl Resin for 3D Printing Color Blue High Hardness High Precision fit by wavelength 405nm
| Appearance: | Botle of 1 litro | Ash ContentTransparent: | Blue |
|---|---|---|---|
| Odor Weak:: | Odor | Bending Strength: | 39-42MPa (Test Standards: ASTM D790) |
| Bending Modulus: | 900-1000MPa (Test Standards: ASTM D790) | Hardness: | Hardness:80 Shore D (Test Standards: ASTM D2240) |
| Notch Impact Strength: | 36.4J/m (Test Standards: ASTM D648) | Wavelength: | 405nm |
| High Light: |
Washable optically curing resin materials for dental applications can be used to produce dental models. |
||
The printed surface of the tooth model has a high degree of hardness and detail restoration.The precision and high temperature resistance of the model can meet the requirements of the production of orthodontic molds,and the washing material can avoid the trouble of traditional ethanol cleaning anda storage.
SAFE:Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
LOW SHRINKAGE
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
ACCURATE
Provides high precision printing and fitting after casting
BIOCOMPATIBLE
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
LIQUID:The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time
DURABLE:Very high hardness and tensile strength
SERTIFICATION:Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN
SPECIFICATION
Appearance: Blue
Bending Strength:39-42MPa (Test Standards: ASTM D790)
Bending Modulus:900-1000MPa (Test Standards: ASTM D790)
Notch Impact Strength:36.4J/m (Test Standards: ASTM D648)
Wavelength: 405nm
.
Contact Person: DANIEL LONG
Tel: +8618022869856
