|
Product Details:
|
| Material: | Resin | Color: | Yellow,Gray |
|---|---|---|---|
| Funcion: | 3D Printing | Feature: | BIOCOMPATIBLE |
| High Light: | Dental Model Resin For 3D Printing,High Precision Dental Model Resin |
||
The surface of the printed tooth model not only has ultra-high hardness,but also has accurate detail reduction degree.The ultra-low shrinkage rate of the material can ensure that the model is stored for a long time without deformation
Dental special light curing resin material,can be used to produce dental models
SAFE:Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
LOW SHRINKAGE
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
ACCURATE
Provides high precision printing and fitting after casting
BIOCOMPATIBLE
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
LIQUID:The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time
DURABLE:Very high hardness and tensile strength
SERTIFICATION:Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN
SPECIFICATION
Hardness: 83 Shore D (Test Standards: ASTM D2240)
Bending Strength:65-75MPa (Test Standards: ASTM D790)
Bending Modulus:1500-1600MPa (Test Standards: ASTM D790)
Notch Impact Strength:20J/m (Test Standards: ASTM D648)
Wavelength: 405nm
| Odor Weak:: | Odor | Bending Strength: | 65-75MPa (Test Standards: ASTM D790) |
|---|---|---|---|
| Bending Modulus: | 1500-1600MPa (Test Standards: ASTM D790) | Hardness: | Hardness:83 Shore D (Test Standards: ASTM D2240) |
| Notch Impact Strength: | 20J/m (Test Standards: ASTM D648) | Wavelength: | 405nm |
.
Contact Person: DANIEL LONG
Tel: +8618022869856
